AA/S Cobra Jet Construction Project - Miscellaneous Fabrication

Aluminum adapter plate was made to mount a manual disk brake master cylinder.

Clutch pedal stop.

Flaming River rack and pinion.

Stock lower contral arm mount prior to any modifications.

Reinforcement plates and tubing used to reinforce lower control arm.

Lower control arm mount after plates and tube are fit and welded in place.

Welder plug used as a quick disconnet plug for the starter motor.

Safety net mounting hardware welded to roll cage. A quick disconnet balljoint is used to lower the net.

Fuel cell and fuel pump mounted in trunck.

Electric water pump drive. The Moroso bracket and pulley was modified. An adapter hub was also fabricated for the water pump.

Last Updated on 3/2/2009