9500rpm.com
9500rpm.com

Project Probe - Brake & Clutch Pedal Modifications


The location of the transmission tunnel made it necessary to move the gas, clutch and brake pedal over about 1 1/2 inches to the left. The clutch / brake assembly was also modified with adjustable positive stops on the clutch. The push rods are attached to spherical rod ends which are bolted to the pedal levers. Aluminum bulkheads were necessary mate the cylinders to the stock assembly.


Click here for an enlargement Click here for an enlargement Click here for an enlargement
Bulkhead Pedal Assembly Pedal Assembly in Car

Click any of the photos for an enlargement and more explanation.
Return to Project Probe Table of Contents
Last Updated on 1/2/2001